The Fund

by

Between four and ten per cent yield are possible, depending on the chosen funds. Investment in green energy: solar, wind power and biogas Fund green, so renewable energy is becoming more and more in the public eye. In addition to the possibility to participate actively in the energy revolution, offer funds in this sector already at middle maturities, typically aged three, very good yield potential. No matter whether biogas, solar or wind power funds, the capital brought by the fund investors will in all cases for construction, operation and maintenance of the facilities used. The generated energy, i.e.

electricity fed as well as, in the case of a biogas plant, additionally heat, in the networks of consumption. This promises great profits by up to seven percent, that reliable flow through the purchase guarantees agreed between operator and State, investors. Investment football: closed-end Fund with a short term at a very young, for the more promising investment is optimal return on the investment in so-called football subordinated loan. Here the money of the investors in the form of a subordinated loan to football clubs in the top leagues indicates which of them subject to release player transfers finance. A good part of the profits thus generated flows to the fund investors at maturity than yield. The investment in football Fund combines high reliability and excellent yield opportunities of up to 7.96 percent from point of view of the investor.

As provider of football Fund securing the capital with special insurance against losses, as they can arise through the loss of a player of who was invested in his transfer rights, effectively. Also will invest of course not only in a single player or Club, but asset strewn, to achieve security and return. To come, what even a very short minimum term of the football Fund of just 180 days, as well as a minimum investment amount of only 2,500 euro also investors attractive with lower credit opportunities. Another important advantage of the football subordinated loan is also in the tax situation. Because through the special position as a donor of a subordinated loan will investors to be an entrepreneur, what has a lowering effect on the taxation of his return. Compare investments and the best investment find how it looks, equals the investment in closed-end funds an ideal opportunity for all savers, what age and income, interest-prone to invest their money. However there is not the sweeping best investment for anyone, but she must be chosen carefully and individually. This decision for the appropriate form of investment requires a previous comparison. In addition, the consumer platform of investment Vergleich.de offers ideal conditions. Here, investors receive all relevant information about the various investments and successful investing in closed-end funds. Of course completely free of charge and without obligation. Prospective investors should take advantage of this opportunity and make more out of their money. Claus j. Kirsten

Fils Tel

by

Result: All sets were cracking through. Rainer Haas, experts of the TuV Rheinland, which accompanied the test came to the clear conclusion that you should hire professionals for this type of work. Also in the broadcast here by 4 “which radiates the MDR, repair kits for the do it yourself have been tested in the past, the result was similar to devastating as in the ARD-test. Conclusion: Auto repair kits, whose Anbieter promise that to on or in the vehicle itself could fix minor damage so, often not worth that is out there for them the money. You normally get no satisfactory result, damage if at all, only resolve, sometimes they look after only verschlimmbessert, so even uglier than before.

Who want to achieve a good result, should rely on a smart repair professional. You can find easily and quickly on smart-repair.de designated specialists. There, the opportunity comprehensively to find out, obtaining multiple offers, and to hire a specialist Workshop offers convenient way. About the provider Smart-repair.de, autoglaser.de and folie.de are an Internet Fachdienstleister for smart repair, vehicle valeting, car glass and window film industries, offers of the AUTO.net GLASinnovation gmbh. The aforementioned consumer specialist portals provide customer inquiries using all technical possibilities actively to specialists and providing maximum customer contacts. Editorially prepared specialized information, glossaries, and sections for frequently asked questions round out the consumer service, the portals offer. AUTO.net GLASinnovation gmbh and the sister company buhrli dataplan GLASmatic gmbh (glasmatic.de), leader for special software for auto glass and auto glass data management in Germany, have their headquarters in Eberbach, near Stuttgart. Responsible in the sense of the press law and contact: Gert off AUTO.net GLASinnovation gmbh Bergstrasse 5 73061 E.r. on the Fils Tel: 93 47 1 fax: + 49 (0700) 95 59 69 69

United States

by

SSD by iNNODISK offer a wide range of advantages over traditional technologies and have a competitive price. Among other things, they offer better performance, a lower Energieaverbrauch and extreme resistance. Unlike HDDs are in a temperature range from-40 C up to 85 C can be used, which allows them so far unattainable markets fail to develop in which HDD SSD by iNNODISK. Also no risk of overheating is at SSDs so fan for cooling may be waived, which lowers the noise on the one and on the other hand the abandonment of movable and therefore error-prone parts allows. In fact, SSDs have no moving or mechanical components. In addition the access times are lower and latencies lower than with HDDs and you no longer have to worry about time-consuming defragmentation. The leading POS system manufacturer AdvanPOS according to hard-disk drives are one of the most common Causes for system failures.

Unreliable HDDs make it difficult for manufacturers of POS systems to enter just the markets in which exists a great demand for their products. Innodisks SSD series enables effective and reliable products to provide exactly such markets AdvanPOS Evergreen. Even more: Innodisks Evergreen SSD ‘L square wear leveling’-architecture increases data transfer rate random access, prolongs the life span and reduces long-term costs. Thanks to Innodisks software iSMART AdvanPOS and its customers to determine possible problems with the SSD, long before it fails. This allows the exchange of a faulty SSD without data loss and without problems for the customers. “The main reason why we use SSDs from Innodisks Evergreen series is that informed iSMART the record state of SSD and customers about the failure date”, as Mr.

Alcott Huang, supervisor of the R & D division at AdvanPOS. “This has saved us and our customers from some headaches.” For more Information about the use of iNNODISK SSD at AdvanPOS please visit: edm.aspx? guid = 8FD9A0207C828F1D1DBB754B54D8293AE9B42826BD563FBF78D1DD922F7998EA2A85EF423F07060C about AdvanPOS AdvanPOS develops and produces advanced POS systems, retail and the hotel and hospitality industry meet the requirements with regard to modern usage. The combination of industrial experience and talent, as well as the use of leading PC technology, AdvanPOS can cover the full range of POS systems. From the kiosk, on ATMs, retail and self-service applications. The systems offer faster work speed, allow easier maintenance, provide customer-friendly display and exhibit an outstanding design. To learn more about the benefits of Innodisks SSD storage products, and how these providers of POS systems and end-user help, please, visit about iNNODISK iNNODISK is a developer, manufacturer and supplier of solutions for industrial Flash memory products and DRAMs for embedded systems with a focus on applications in the industrial, aerospace and defense industry. Access to the extensive experience, to produce Flash memory products for embedded systems, iNNODISK enhances its product portfolio for 2012 to cover the area of cloud computing. Founded in 2005 with its head office in Taipei in Taiwan, and technical support as well as sales teams in China, Europe, Japan and the United States, is iNNODISK able to support its customers worldwide. With abundant experience and unrivalled knowledge of the storage industry, iNNODISK developed products of excellent quality, unmistakable performance, a great value for money and highest reliability. Please visit for more info on iNNODISK

ARD Savings

by

Sting capital – and cash in an investment, still too few German invest the savings book out. This is strange, finally saving money and finding is announced today in almost all areas of daily life after the value. But when it comes to the proliferation of own money, most of savers shy once targeted assets steeped in return on to confront. The experts of the consumer platform of investment Vergleich.de have studied various forms of closed-end funds, with their help, even small investors can achieve good yields. Their conclusion: No fear of capital investments. “.” Savings and money market accounts unattractive who parked his capital on day money or savings accounts, not increase it, but it loses even more money.

A global, very precarious interplay between low interest savings, amounting to just one percent, and inflation is to blame for this. According to a recent report of the ARD of stock market experts alone the citizens a year lose around this effect ten billion euros. Just the interest rate of the day money account so popular with the Germans, is as low as ever and can daily continue to decline. Also the Festgeldanlage when a credit institution is always less attractive. A good investment, for example in closed-end funds, it currently is the only sensible way that savers can profitably invest their money.

Not many investors fear getting bogged down with a complex product. “This concern however, is inappropriate, because working capital investment in closed-end funds” money of Saver based on very simple principles: the investor a fund provider makes available a certain amount for an agreed period. After expiration of the contract term, he gets back his invested money plus the earned yield. Who so invested in the appropriate investment product with good yield, can enjoy significantly higher interest rates at the end of its term a, compared to the savings account.

How Do I Renew My Heater?

by

What is to be aware of when you need a new heater? If heating has come in the years this should be necessarily replaced. Because an old plant emits too much heat to their environment, because the boilers were usually not sufficiently isolated. Also, old plants must be mostly around the clock in operation get sufficient heat into the rooms. Many homeowners get on solar panels or wood pellets to heat with renewable energy, and to protect the environment. That makes sense, because conventional heating medium such as oil and gas are becoming increasingly expensive. The new facilities are designed for effective heat better and are also better to program. Renew a heating system with low temperature boilers low-temperature boilers work energy saving because the boilers are much better insulated than some years ago.

Replace the heating the boiler run only a short time to keep the temperature in the House and to prepare the hot water. Then they turn from time to time. If the heating system has been programmed so that the rooms only fully be heated when the occupants are at home, energy can be saved also. To achieve best results refresh after heating, the heating system on a regular basis must be serviced. At the same time, the installer may check whether the system energy-saving works.

Renew only necessary parts of the heating system if the heating switch off the heating renew it is sufficient in most cases, only the boiler needs to be replaced. Pipes and radiators can be used in most cases. For the replacement of the pipes and radiators is associated mostly with high cost and very laborious. Should together with the boiler tubes and radiator be replaced must be torn up walls and floors. This work should be planned with a renovation or extensive renovation of the House, for the changes in the heating mode to refresh are acceptable. Were all pipes laid and the new radiators mounted on the walls, all parts can Heating system with boiler must be connected. Before walls and floors be closed again, a test run of the heating system is necessary necessarily, to determine that all pipes and radiators are watertight and no water can penetrate more outward. Then the project can replace heating his find. It has become at the heater renew opted for the right type and size of the plant, can be saved in the future energy and money. Because only in this way that makes up heating renew finally paid and the output for the new heating system can be as fast as possible paid.

Marketing Articles

by

You are trembles with the same idea of keywords and titles? If the answer is Yes, then you are practically leaving money on the table. For example, I don’t like much cooking, but I do it because I have 3 small children and a husband. Our family would not be so efficient and happy if not it gave fuel regularly to our House. And not any kind of fuel as the fuel, fast food of high quality, such as homemade meals. The same applies to the drafting of and the marketing of articles of their own. If you have a business online, you can not hate writing articles. When you write good content articles, customers trust you, would have more traffic, more visibility and thus more sales.

Now, who want not to all this at zero cost? I think one of the reasons why can hate writing articles, is that he never always finds the way to start and then maintain a consistent writing schedule. Perhaps some of you have no idea what to write, or don’t know if what you are writing is a content that is worth reading. All major vendors on the web that are making money out of it have used article directories. This I know for certain. Think of this how to find information about the latest product that you bought? It is likely to carry out an organic search for something in the search engines and there you may find information related to that search. Probably written by the author of this product information. So now that we’ve established that you don’t like to write articles, but you know that it is an absolutely essential part of any marketing plan of items, this will help you start. Lucia Fort related articles: 4 tips for marketing with articles 6 tips for marketing with articles find the motivation to write articles original author and source of the article

Attraction Marketing

by

This new strategy mainly divided it into 3 key elements: 1. training: previously not it invested absolutely nothing in my training, I wanted to learn only through free resources, and trial and error, I thought that you doing what he was doing, my network was going to start to grow increasingly fast, but not until after a few months was me di account that spent time and my network was somewhat stagnant, therefore was doing something wrong, and if I wanted to get ahead needed to invest in a good course about MLM. Enter to MUNMI (my University of business MLM Online), I began to change my way of working, and since then more well I lack time to follow all the courses that would like to buy, and now never think to let me train. 2 Attraction Marketing: This means that rather than be promoting our business like crazy and chasing people so that they join with us, we must create Internet presence, create relationships with other people in the Middle, create trust, position ourselves as experts in our niche market, so that in this way, are people that we find on the Internet, and Saudades we ask, we buy or join with us. This can be done through blogs, social networks, youtube, etc., promoting our personal brand, i.e., to ourselves as individuals, rather than promote our business, or our products directly. 3 Subscriber lists: it is always good to have pages with forms of catch landing with an autoresponder, or insert these same forms in your blogs, offering something in return, in this way can save emails from people interested in what you offer, since it may be that at the moment does not buy you anything, but you stay with your emails and your permission to send them emails, and therefore can be tracked, by sending them letters of sale scheduled, thus increasing the chances that you buy or join with you.

MCM Estate

by

“Stable, robust and reliable”, writes to the trend in Magdeburg the real estate newspaper currently. Although the capital of Saxe anhaltinische could hold not the positive development of the previous year in terms of rental, but this was marked by a special effect. So rented proud 15,000 square meters in one fell swoop in 2011 the Ministry of environment of the country and thus “distorting” the big picture. Extrapolating this rental earnings from 2012, Magdeburg increased again in 2012. To give an impression of the economic situation of the city: despite rising population, decreases in the unemployment rate significantly.

Magdeburg is in the Eastern European cities network said continued attractive prospects offers in the real estate market. The charge of MCM investor Management AG to see continued good prospects for investors. The vacancy in the city declined in 2012 to 13.5 per cent (previous year 13.7 percent), very sensitively dealing with no longer rehabilitation-enabled objects. The demand is unbroken, which is why professionals determine that Magdeburg real estate market is stable through and through. Because even withdrawing the “market bodies”, which fell vacant massively off.

There are currently living around 230,000 inhabitants in the town. The top rent for Office objects remains at 10.50 euros per square metre, on average there are around 8.50 euros. Investor interest is undiminished, because in particular apartments are currently still considerably cheaper to acquire than, for example, in Berlin. But the demand comes increasingly from its own users. High in the favor of investors maintained apartment buildings stand, so the real estate newspaper. A business which operates MCM very successfully for many years and this benefit investors in the form of profit participation rights. A smart strategy, because many investors would benefit with manageable amounts better from the professional as to be years-bound itself on many real estate development business. For more information, MCM investor Management AG

BIM System

by

Jenoptik s business division laser systems in the field of lasers & material processing receives the American Vision Award 2013 for the JENOPTIK-VOTAN BIM. The JENOPTIK laser cutting system-VOTAN BIM is the product that have the greatest potential of the nominated products to solve business challenges through technological innovation. Jenoptik have clearly proven by the technological progress with the laser cutting system. Main criteria award were the three aspects of innovation, value and impact for the vision. Sponsored by the American Technology magazine of high tech views, the award program was launched in 1996 in life, to capture innovations in applications of information technology. The customer benefits of technology innovation is at the Centre of the assessment.

Laser machine for demanding tasks in the 3D-Metallbearbeitung. The Jenoptik’s Division had the JENOPTIK laser cutting system-VOTAN BIM (beam in motion) presented in the autumn of 2012 for the first time in the United States. The system combines a fixed laser with robot-assisted Motion sequences. The centerpiece is a laser robot with integrated beam Guide. The robot arm is unique, because the laser beam is fully integrated and extremely precise with a repeat accuracy of + 100 m can be done”, so Christon Manzella, sales manager of the Jenoptik laser systems in North America Division. With the new plant concept, currently, laser services can be used by up to 5 kilowatts.

The advantages of a robotic system, such as the high mobility and accessibility, precision and dynamics of the system, remain unchanged. Finds the JENOPTIK-VOTAN BIM for the laser cutting of 3D-Metallbauteilen especially in the automotive industry, for example for complex 3D-Karosserie-and construction parts or hydroformed tubes for exhaust systems and car body components. But also the machining of contours and the placement of function holes in so-called white goods, in tanks and containers are made considerably easier by the laser machine. The other possible applications Laser cutting system is the processing of thin metal parts and demanding profiles such as an aspirator or an exhaust system. “The innovation in the JENOPTIK-VOTAN BIM is in your flexibility in the processing speed and efficiency in cost and process maps, which offers various advantages above all car manufacturers and automotive suppliers”, summarizes Christon Manzella. The axis movements of the robot arms are up to 60 percent faster than the norm in the laser metal processing and allow therefore shorter cycle times than conventional metalworking laser robots.” Other advantages of the JENOPTIK laser machine-VOTAN BIM are an excellent contour accuracy for high-quality cutting result, short commissioning and implementation times and low operating costs through energy-efficient laser sources. Also, the laser cutting system distinguishes itself by its compact design and the extremely flexible handling as also dynamics.

How To Do A Market Analysis

by

We have decided to start a business, or expand the line with a new product, anyone who is our big idea to develop, we must evaluate the environment and define our goals. The analysis will always be useful. And one of these is the market analysis. To begin with, what we mean with that will analyze a market. In the sense of a business, market definition is the following: market: is the place where they sell the product or service; i.e. the market defines the opportunity and customers. When the necessity of the client binds with the product or service, defines a business opportunity.

This means that we must have a good knowledge of our product and our market. You need to take into account that this is only a part focused on customers. If we wish to have an approach more general analysis of business opportunity there is Business Plan: steps to do a market analysis are as follows: define your market: the description of the market with features detailed demographic data, geographical, social, economic etc; they will give us a more complete profile to be able to locate them. The segmentation is also very useful since you can categorize their consumers and develop more targeted strategies. Evaluate the size and projection of the market.

This is important since one of the basic objectives of the market analysis is knowing if an opportunity exists and if it is possible that this will capitalize on. For example, if the number of internet users grows and these are still appreciating the purchase online, companies will find greater opportunities to sell their products for this medium. Identify your value proposition. You will be giving a use value to its clients when it comes to offering your product or service. This value must be greater than the purchase price that they are paying. I.e. the client perceived benefits in your buying decision. This will get it if you clearly identify solutions that delivers its product to customers problems. At this point there are useful strategies such as: identifying the advantage Competitive, or the key factors of success. For a market analysis, there is a complete tool that will help you solve it, this is the market research.